PP is the workhorse resin behind woven bags, food containers and automotive trim. We supply raffia, film, injection, thin-wall and impact grades from tier-one producers — regular sources include Yulong Petrochemical, Borouge and SIBUR — with full COA/MSDS on every batch.
These are the PP grades we quote most often. If your part needs something else, tell us the application and we will match a grade instead of guessing.
| Grade | MFR (g/10min) | Typical application |
|---|---|---|
| T30S | 3.0 | Woven bags, FIBC, ropes, strapping |
| T30F-1 | 3.0 | BOPP film — adhesive tapes, food packaging, overwrap |
| 1100N | 12 | Housewares, caps, thin-wall containers |
| M70 | 70 | Thin-wall food containers, high-speed injection |
| 2500HW | 2.0 – 2.5 | Heavy-duty crates, corrugated pipe, automotive parts |
| K8009 | 8.5 | Crates, battery cases, appliance parts |
| K8003 | 2.5 | High-impact thick-wall parts, sheet, pipe, battery boxes |
| 344R-K | 24 | Transparent thin-wall containers, caps and lids, houseware |
MFR at 230 °C / 2.16 kg per ASTM D1238 (typical values; the batch COA is binding). Regular sources include Yulong Petrochemical, Borouge and SIBUR — equivalent grades from other tier-one producers can be quoted against the same specification.
Reference values for homopolymer T30S. Your batch COA is the binding document — this table is for grade selection, not for incoming inspection.
Swipe horizontally to see all columns →
| Property | Test method | Unit | Typical value |
|---|---|---|---|
| Melt flow rate | ASTM D1238 | g/10min | 3.0 |
| Density | ASTM D792 | g/cm³ | 0.90 |
| Tensile yield strength | ASTM D638 | MPa | ≥ 30 |
| Elongation at break | ASTM D638 | % | ≥ 200 |
| Flexural modulus | ASTM D790 | MPa | 1,400 |
| Notched Izod impact, 23 °C | ASTM D256 | J/m | 25 |
| Heat deflection temperature (0.45 MPa) | ASTM D648 | °C | 95 |
| Vicat softening point | ASTM D1525 | °C | 152 |
| Rockwell hardness | ASTM D785 | R-scale | 95 |
| Water absorption, 24 h | ASTM D570 | % | < 0.02 |
Copolymer K8003 differs mainly in impact strength (Charpy notched ≥ 40 kJ/m² at 23 °C) and lower stiffness — ask us for the K8003 datasheet if your part takes impact load.
T30S draws evenly at high line speed for woven bags and FIBC; T30F-1 is the BOPP film grade for tapes and food packaging.
1100N covers general injection; M70 runs at 70 MFR for thin-wall food containers and fast cycles.
K8009 and K8003 absorb impact at low temperature; 2500HW is the low-MFR grade for sheet, pipe and large parts.
Incoming inspection fails when documents are missing, not when the resin is wrong. Every shipment leaves with a complete set.
Yes — 2 kg free of charge for grade trials; you cover the courier. Tell us the grade and the process, and we will send the closest match.
T/T and L/C at sight are both accepted. The exact terms are written on the proforma invoice, so there is no ambiguity later.
Send us the process (raffia, injection, film, sheet) and the part you make. We match MFR and impact to the line and send the datasheet before you commit to anything.
Yes — recycled PP granules for non-food applications. Colour and MFR vary by lot, so we quote against your target specification.
Grade, monthly volume and destination port are enough for us to come back with a price. We reply within one business day.
+86 131 2729 3935
WhatsApp / WeChat — replies within one business day
Soho Capital, 19th Floor, Unit 01-09
Jl. Letjen S. Parman Kav. 28, West Jakarta 11470
